Here it is, instead of having everyone PM me (had about 80 people take me up on the Free system last time) I will now have it here for you to DownLoad! Much easier on me! Remember, this is for Mushclient Only. You can Find Mushclient at www.mushclient.com , it's a free client that has amazing capabilities and has very fast speed responce. Just DL the file at the bottm, UNZIP it, and read the Setup file...should be easy from there!
Anyone who uses my current Free System should DL this and install it since it has updated cures and runs ALOT smoother than the last system, I actually got to test this one and spent alot longer building it.

Included in FREE System:

-Auto-sipper for Health/Mana/Ego with Sparkleberry safety
-Auto-Deep Wounds healer
-Auto-Pipes Refill and Tracker for Faeleaf/Coltsfoot/Myrtle
-Balanced/Qued Curing for Herbs/Salves/Potions....with use of Potions over Herbs based on current affliction balance
-Alerts for Dangerous skill/afflictions such as Instakills
-Diag Curing based with priority
-Writhe and Focusbody balances and Ques
-Help files to help learn aliases and trigger set-ups
-Basic Aliases (such as those to smoke pipes, open/close doors, do basic actions)
-Cures are updated for recent Envoy changes
-GAGS for most of the annoying little things that don't matter. Though you can remove these

I accept Donations aswell, which is something offered alot before but I usually turned down, but otherwise, DL and Enjoy, it's Free and the best you will find for it's price

Here it is:

*bounce*

I am so downloading this when I get home...is there any way to save the triggers I have set up for myself though?

Alloo!

Seems one small problem is still in your system



Why does it repeat the status line like that over and over each time the pipes get lit?

...you just got a fully operational, free system and you're complaining about a little bit of parsing?

Hang your head in shame.

I'm asking why it does that, get over yourself.

Dont complain about those pipes.
You need to try light 3 pipes when you get this messages cose there isnt nice way to chack waht pipe is cold.
If you want to ligth only one pipe you need to know what pipe isnt lit and there isnt nice fast way to get it. Right now i could tell you few, like using pipelist after 'Your pipe has gone cold and dark.' and then light only this that dont lit alredy or you could track what pipe you have used as last as this one will unlit first.

So lighting 3 pipes and then gaging is best and fastest way to light your pipes.

I actually track pipes to know which one goes cold (without the need for PipeList) and then light only that one. I admit that it is a little bit slower, but it is possible.

The reason you see those prompts is because Ethelon has gagged the response messages from the lighting attempts, no doubt. If you don't like them, just look for the triggers with the "gag" labels and disable or delete them.

Even easier is to buy arti pipes!

It's admirable to just give away your system like that though..on the other hand, I probably wouldn't be of that opinion if it'd be a zmud system .

I didnt say it is impossible. I know how to do this pipe tracking but i'm to lazy to do it for myself
But i admit its annoying when you see those blank lines. So mayby one day i will do this tracking for myself.

If anyone has suggestions for the next update they would like to see, just post them here. I will see about trying to make the relighing a little less spammy using the other suggestions. I've always had artie pipes so really never noticed anything.

I don't have any suggestions for this great system. I have a question though:

How do you turn on the parry system?

Great job on the new version. Very good, keep it up.

Just looking at the aliases text document, I would make a couple of suggestions:

1. There are aliases to the coltsfoot pipe and faeleaf pipe arti variables, but no myrtle pipe yet. I'm sure it was just something either too new to add or overlooked here.

2. Omit aliases for things that aren't involved in curing or defenses, like giving a leaf to a pixie or even opening a door. Seems out of place, and is the sort of thing that people will make for themselves anyway.

3. Aliases to turn various parts of the system on/off, much like the ah alias. Sometimes people need to turn off herbs and leave on writhing, depending on what they're testing or fighting.

4. Is there any way to reset things other than diagnose/wounds? Can the variables for balances, afflictions, etc, be put back to defaults?

yeah, RESET itself resets them all.

Also, I was asked to keep in hte door opening/closing aliases.
The few like the pixie leaf one should be removed, guess I missed them.

And I should have added a Myrtle Pipe, should be "sp3"

Also, the Parry, Stance, and the Auto-Raze Systems will not work in the Free version. Those are only offered in my full version.

I really like those parts myself. Also, is the full version available and for how much?

Ok!

So what's the price for the full version?

I saw that the myrtle pipe was in the variables, but there doesn't seem to be an alias to set it as an arti pipe, like the others.

I think there may be a logic error in one of the checks. It seems this is checking for putting sixth sense back up, but I think there should be another set of parentheses around the "blind OR deaf" part. What do you think?

I'm actually going to put up my Zmud system for free in a month or two once I've worked out the tiny bugs and stuffs. Might try keeping track of lit pipes like Zarquan does as well, tired of spam lighting.

At least one person besides me has been using it and not doing too bad, so hopefully it'll work for others.

In response to Quidgyboo:
Something that I did to enhance the gaggy-ness was to make a trigger that captured my prompt and disable itself. Make sure you have the "Keep parsing" (or whatever it's called) and "Omit from output" boxes checked and make sure it has a label.
Then just a command at the bottom of each gag to enable the PromptGag trigger. Then when you gag something, you'll get a single blank line at the bottom of your screen, instead of fifty individual prompts.

On another note, when I'm fighting loadores it doesn't seem to be tracking my prone status and auto-standing. Even when I'm getting the "You must be standing to do that" message. I'm looking through it now, but does anyone know how to fix it?

Edit: Incidently, where are you hiding the InfoBar thing this time? Last time I modified it to include an experience counter, and I figure if they don't work I should take out the stance and parrying info, but I can't find it in the script file.

Advice: You are awsome.

I guess thats not advice, but seriously you are awsome. And generous.

The Info bar was updated alot to make it easier to read, so it's still there...just bigger now.

I'm not sure whats up with the loamadore thing, or the standing, it should have stood right away, it does check for balance/eq though, so if you werte off either it wouldn't stand. In testing Loamadores and just trying to stand all worked.