Shryke is right. You cant get 500 prec on twa handed weapons. Around 460-470 is cap.

And yet people have told me they have 490 and 507... gah, too much conflicting information. And if what people say about scimitars is correct, multiply that by 2.2 and you get 518.

people with above 470 precision swords got them forged before the cap. I guarantee you wont get a 470+ 2 hander any more

When the adminds announce the cap Ethelon got that crazy greatsword afterwards so unless they changed it again you can still get them.

just got a scimitar with 183 speed

Are these stats for masterwork weapons or the "normal" ones?

Also, I got non-masterwork hammers with damages of 75, and some forges had speeds of as low as 190.

The cap for two handed prec weapons is over 470

I just like, 3 days ago forged a 178/498/178 greatsword, so the cap is definately higher than 470. I've also since then forged 3 or 4 swords with over 480 precision.



Btw, taking offers on that 178/498/178 beast of a sword, highest is up to 100k, so if you want it, pm me!

Meh. I've been looking for equivalent scimitars for a while (that being 89 / 226 / 178, with the bonus taken off). Only way to truly take advantage of Faeling speed.

Yeah, I'd love a pair of those. I'm so over my current (slow) speed.

The stats on the first page are only accurate for master weapons... but thanks for the updates.

So, I can get 270-279 speed hammers then?

Yes, you can.

But my mace has 183 damage. Unless I arti'ed a pre-nerf weapon... *twiddle*

Those are only about avarage stats. I had rapier with 101 damage.

Avarage stats would be something like this:

broadsword - 150/150/150
longsword - 125/175/150 (not sure about this one, i made to little longswords to be sure)
rapier - 50/150/250
scimitar 100/200/150

This is quite rounded. But its what avarage of that weapons looks like.

Oh, I thought those were the minimums and maximums.

They are realisitic mins and maxes. After about 50 forges you can expect to get atleast one with the min and atleast one with the max.

Diamante is right about the precision on greatswords the first one Murphy made for me was around 487 or so and came out to 511 etched. I made one the other day at (170) 496 (150) i cant remember the base of the ones in ( ) but when etched it is 195 520 170. So it can be forged. It may take forever to do it though.

Minor update to first post, thanks to Drago.

Sadly, the smallest damage for rapiers is 2, I forged one with 279 speed, and 1 damage.... I forgot the precision, the max precision 180 (highly hard ot get) I forged a 182 and a 183 precision rapier so I think the cap moight be around 185. I know the cap for speed on rapiers is right, and precision on scimitar's, and the damage on broads.